Evolution R300DCT 300mm 12" Electric Disc Cutter, Concrete Saw, with Diamond Blade

The Evolution R300DCT Electric Disc Cutter has a 115mm, cut capacity, that's more than most 12" petrol concrete saws. It's built for cutting, bricks, blocks, paving, reinforced concrete and decorative stone. With a 300mm Diamond blade included in the box you'll be cutting quicker than you can pour gas into that old , noisy, messy, petrol saw you've been using for too long.

With a 2400w *high-torque electric motor delivering consistent peak power, the R300DCT powers through the toughest masonry cutting tasks indoors and outdoors. With no fuel, no fumes or exhaust gases to worry about you can use the R300DCT anywhere. With no engine to service, the R300DCT Electric Disc Cutter is the King of cost-effective concrete saws.

Built for making accurate, long, low cuts in slab and easy vertical cuts in brickwork the R300DCT features a wheeled skid plate to take the strain off making accurate cuts, it even lets you put the tool down with the blade still spinning. Our new 300mm Electric Disc Cutter also showcases our Power Protect Technology, shielding internal parts from dust & water ingress for longer tool life and of course, it comes backed by our 3-year guarantee.

*The 110v version of this tool comes with a 3-pin, round 16amp socket fitted and requires connection to a 5kva rated transformer.

R300DCT User Manual

Features

• Huge Cut Capacity. The all-new Evolution 300mm /12-inch concrete cutting saw can cut up to 115mm /4-1/2 inch deep! That’s more capacity than most leading petrol-powered saws.
• High Torque Motor. Delivers consistent peak power and prevents the machine from stalling under heavy-load.
• Electronic brake Safety counts and that’s why all our new DCT Electric Disc Cutters feature an advanced electronic brake control for the disc
• Low Maintenance vs petrol-powered saws. No pull chords, no petrol and no servicing, saves you time and money.
• Steel Front Handle. With rubber over-mould gives the user total control and lives up to the toughest jobs. The full wrap-around design makes it easy to make a cut at any angle.
• Large Blade Coverage & Built-in Dust Port. With rubber cap for easy vacuum attachment, and protects the user from flying debris and optimises dust suppression and collection.
• Ergonomic Handle & Trigger. With rubber over-mould improves tool control and reduces user fatigue.
• Low Vibrations. The smooth yet powerful electric motor makes for easy operation and can be safely used for long periods of time. Plus there are no harmful fumes emitted making it safer to use.
• Balanced Weight. Optimised balance and even weight distribution puts the centre of gravity squarely between the handles for effortless use of the machine. Great for prolonged use.
• Adjustable Blade Guard. With single-handed operation allows for quick adjustments while holding the tool and keeping your hand away from the blade.
• Wheeled Skid Plate. Makes straight cuts at ground level effortless, and the metal skid plate protects the tool and lifts the blade off the ground so it can be put down with the blade spinning.
• On-board Tool Storage. One multi-tool for all machine adjustments with dedicated onboard storage.

All Evolution DCT models come equipped with our new Power Protect Technology to conquer the most demanding jobs and cut for years to come.

Double insulated motor coil protects the motor from dust ingress and vastly improves motor life. Features a robust powder coating for complete protection.

Unique aerodynamic fan system increases airflow through the motor for better cooling during heavy-duty use and expels dust.

Specially designed air vents prevent water and other debris from entering the motor housing to make it safe for use in all conditions.

Built-in drainage holes allow any water to escape from inside the machine body and prevents damage to internal parts.

Specifications

Power	2,400 / 1,600 watt (230v / 110v )
Plug	230 v UK mains plugs, 110V 16amp 3 pin round
Rated Speed	5,090 / 4,040rpm (230v /110v)
Max. Duty Cycle	20 Mins
Weight	9.7kg
Cable	3m /9 ft 10 in. Rubber Cable
Cutting Capacity at 90˚	115mm /4-1/2 in.
Blade Supplied	General Purpose Diamond Blade (D300SEG-CS2)
Blade Diameter	300mm /12 in.
Blade Bore / Arbor	20 & 22.2mm (Reversible flange)
Sound Pressure Max. LPA	98.0dB(A) K=3dB(A)
Sound Power Level Max. LWA	109.0dB(A) K=3dB(A)
Handle Vibration Max. Level	6.15m/s2 K=1.5m/s2

Items Supplied

R300DCT Disc Cutter	x1
300mm Diamond Blade	x1
Multi-Tool (Adjustments)	x1
Wheeled Undercarriage	x1
Rubber Cap (Extraction Port)	x1
Instruction Manual	x1
Hose Connector (R300DCT+ only)	x0

Compatible With:

Evolution 300mm /12 in, Segmented Edge, 22.2mm Bore, Concrete, Stone, Brick Cutting Diamond Blade (D300SEG-CS2)

Evolution 300m /12 in, Segmented Edge with High Diamond Concentration, 22.2mm Bore, Premium Diamond Blade (PD300SEG-CS2)

Evolution 300mm /12 in, Segmented Edge, 22.2mm Bore, Multi-Purpose, Metal Cutting Diamond Blade (MD300SEG-CS)

Evolution Soft Shell Carry Tool Bag (012-0250)

NB: Evolution Electric Disc Cutters are not intended to be used with 3rd party abrasive discs. These tools have not been certified for these blade types and their use could potentially result in accident or injury.